 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| High Power DPDT Switch with Logic Control CXG1213XR Description This CXG1213XR can be used in wireless communication systems, for example, W-CDMA handsets. The IC has on-chip logic for operation with 2 CMOS control inputs. The Sony JPHEMT process is used for low insertion loss and on-chip logic circuit. (Applications: Antenna switch for cellular handsets, dual-band W-CDMA) Features Low insertion loss 2 CMOS compatible control Package Small package size: 12-pin XQFN Structure GaAs JPHEMT MMIC Absolute Maximum Ratings (Ta = 25C) Bias voltage Control voltage Operating temperature Storage temperature VDD Vctl Topr Tstg 7 5 -35 to +85 -65 to +150 V V C C GaAs MMICs are ESD sensitive devices.Special handing precautions are required. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. -1- E05X06A61 CXG1213XR Block Diagram and Recommended Circuit RF2 GND CRF (27pF) 6 GND F3 7 5 F4 3 GND 4 CRF (27pF) RF3 RF1 CRF (1000pF) GND 8 F1 F5 F2 F6 2 CRF (1000pF) RF4 9 1 GND 10 11 12 Cbypass (100pF) VDD CTLA CTLB When using this IC, the following external components should be used: CRF: This capacitor is used for RF decoupling and must be used for all applications. Cbypass: This capacitor is used for DC line filtering. 100pF is recommended. Truth Table State 1 2 3 4 CTLA L L H H CTLB L H L H ON Path RF4 - RF3 RF4 - RF2 RF1 - RF3 RF1 - RF2 F1 OFF OFF OFF ON F2 OFF OFF ON OFF F3 ON OFF ON OFF F4 OFF ON OFF ON F5 OFF ON OFF OFF F6 ON OFF OFF OFF -2- CXG1213XR Electrical Characterstics (1) (Ta = 25C) Item Symbol State 1 Condition RF4 - RF3, 830 to 885MHz 1920 to 1980MHz 2110 to 2170MHz RF4 - RF2, 830 to 885MHz 2 Insertion loss IL 3 RF1- RF3, 1920 to 1980MHz 2110 to 2170MHz 830 to 885MHz 1920 to 1980MHz 2110 to 2170MHz RF1 - RF2, 830 to 885MHz 4 1920 to 1980MHz 2110 to 2170MHz 2 1 Isolation ISO. 4 3 VSWR Switching speed 1dB compression input power ACLR Harmonics Bias current Control current *1 Min. Typ. 0.25 0.40 0.45 0.25 0.40 0.45 0.25 0.40 0.45 0.25 0.40 0.45 Max. 0.45 0.65 0.70 0.45 0.65 0.70 0.45 0.65 0.70 0.45 0.65 0.70 Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB -- RF4 - RF3, 830 to 885MHz 1920 to 2170MHz RF4 - RF2, 830 to 885MHz 1920 to 2170MHz RF1 - RF3, 830 to 885MHz 1920 to 2170MHz RF1 - RF2, 830 to 885MHz 1920 to 2170MHz 50 20 15 25 20 25 18 20 15 25 20 30 25 30 23 25 20 1.2 5 10 VSWR TSW P1dB ACLR1 ACLR2 2fo 3fo IDD Ictl s dBm VDD = 2.85V 5MHz, 3.84MHz BW*1 10MHz, 3.84MHz BW*1 *2 *2 32 -60 -65 -95 -90 80 10 -50 -55 -80 -75 150 20 dBc dBc dBc dBc A A VDD = 2.85V Vctl (H) = 1.85V *2 Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 830 to 840MHz, 1920 to 1980MHz, ROHDE & SCHWARZ SMIQ06B is used as a signal source, and the modulation and filter settings conform to WCDMA. Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 830 to 840MHz, 1920 to 1980MHz -3- CXG1213XR (Ta = -35 to +85C, The temperature characteristics are design guranteed.) Item Symbol State 1 Condition RF4 - RF3, 830 to 885MHz 1920 to 1980MHz 2110 to 2170MHz RF4 - RF2, 830 to 885MHz 2 Insertion loss IL 3 RF1- RF3, 1920 to 1980MHz 2110 to 2170MHz 830 to 885MHz 1920 to 1980MHz 2110 to 2170MHz RF1 - RF2, 830 to 885MHz 4 1920 to 1980MHz 2110 to 2170MHz 2 1 Isolation ISO. 4 3 VSWR Switching speed 1dB compression input power ACLR Harmonics Bias current Control current *1 Min. Typ. Max. 0.60 0.80 0.85 0.60 0.80 0.85 0.60 0.80 0.85 0.60 0.80 0.85 Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB RF4 - RF3, 830 to 885MHz 1920 to 2170MHz RF4 - RF2, 830 to 885MHz 1920 to 2170MHz RF1 - RF3, 830 to 885MHz 1920 to 2170MHz RF1 - RF2, 830 to 885MHz 1920 to 2170MHz 50 18 13 23 18 23 16 18 13 1.2 15 VSWR TSW P1dB ACLR1 ACLR2 2fo 3fo IDD Ictl -- s dBm -45 -50 -75 -70 180 40 dBc dBc dBc dBc A A VDD = 2.85V 5MHz, 3.84MHz BW*1 10MHz, 3.84MHz *2 *2 32 BW*1 VDD = 2.85V Vctl (H) = 1.85V *2 Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 830 to 840MHz, 1920 to 1980MHz, ROHDE & SCHWARZ SMIQ06B is used as a signal source, and the modulation and filter settings conform to WCDMA. Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 830 to 840MHz, 1920 to 1980MHz -4- CXG1213XR (Ta = 25C, The IMD characteristics are design guaranteed.(with recommended circuit) ) Item Symbol IMD2 IMD3 1 2 IMD2 IMD3 IMD IMD2 IMD3 3 4 IMD2 IMD3 *1 *2 State *1, *1, *1, *1, *2, *2, *2, *2, *1, *1, *1, *1, *2, *2, *2, *2, Condition Blocking f= 45MHz Blocking f= 1715MHz Blocking f= 790MHz Blocking f= 2550MHz Blocking f= 190MHz Blocking f= 4090MHz Blocking f= 1760MHz Blocking f= 6040MHz Blocking f= 45MHz Blocking f= 1715MHz Blocking f= 790MHz Blocking f= 2550MHz Blocking f= 190MHz Blocking f= 4090MHz Blocking f= 1760MHz Blocking f= 6040MHz Min. Typ. -105 -108 -108 -107 -107 -117 -106 -106 -105 -110 -107 -115 -107 -110 -106 -107 Max. -95 -98 -98 -97 -97 -107 -96 -96 -95 -100 -97 -105 -97 -100 -96 -97 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Rxf = 880MHz, Txf= 835MHz(Pin1= 20dBm), Pin2= -15dBm, 0/1.85V control, VDD = 2.85V Rxf = 2.14GHz, Txf= 1.95GHz(Pin1= 20dBm), Pin2= -15dBm, 0/1.85V control, VDD = 2.85V -5- CXG1213XR Electrical Characterstics (2) (Ta = 25C) Item Symbol State 1 Condition RF4 - RF3, 843 to 925MHz 1920 to 1980MHz 2110 to 2170MHz RF4 - RF2, 843 to 925MHz 2 Insertion loss IL 3 RF1- RF3, 1920 to 1980MHz 2110 to 2170MHz 843 to 925MHz 1920 to 1980MHz 2110 to 2170MHz RF1 - RF2, 843 to 925MHz 4 1920 to 1980MHz 2110 to 2170MHz 2 1 Isolation ISO. 4 3 VSWR Switching speed 1dB compression input power VSWR TSW P1dB ACPR1 ACPR ACPR2 ACPR1 ACPR2 Harmonics Bias current Control current *1 Min. Typ. 0.25 0.40 0.45 0.25 0.40 0.45 0.25 0.40 0.45 0.25 0.40 0.45 Max. 0.45 0.65 0.70 0.45 0.65 0.70 0.45 0.65 0.70 0.45 0.65 0.70 Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB -- RF4 - RF3, 843 to 925MHz 1920 to 2170MHz RF4 - RF2, 843 to 925MHz 1920 to 2170MHz RF1 - RF3, 843 to 925MHz 1920 to 2170MHz RF1 - RF2, 843 to 925MHz 1920 to 2170MHz 50 20 15 25 20 25 18 20 15 25 20 30 25 30 23 25 20 1.2 5 10 s dBm VDD = 2.85V 900KHz, 30KHz BW*1 1.98MHz, 30KHz BW*1 1.25MHz, 30KHz BW*2 1.98MHz, 30KHz BW*2 *3 *3 32 -60 -65 -60 -65 -95 -90 80 10 -50 -55 -50 -55 -80 -75 150 20 dBc dBc dBc dBc dBc dBc A A 2fo 3fo IDD Ictl VDD = 2.85V Vctl (H) = 1.85V *2 *3 Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 898 to 925MHz, ROHDE & SCHWARZ SMIQ06B is used as a signal source, and the modulation and filter settings conform to IS-95. Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 1920 to 1980MHz, ROHDE & SCHWARZ SMIQ06B is used as a signal source, and the modulation and filter settings conform to IS-95. Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 830 to 840MHz, 1920 to 1980MHz -6- CXG1213XR (Ta = -35 to +85C, The temperature characteristics are design guranteed.) Item Symbol State 1 Condition RF4 - RF3, 843 to 925MHz 1920 to 1980MHz 2110 to 2170MHz RF4 - RF2, 843 to 925MHz 2 Insertion loss IL 3 RF1- RF3, 1920 to 1980MHz 2110 to 2170MHz 843 to 925MHz 1920 to 1980MHz 2110 to 2170MHz RF1 - RF2, 843 to 925MHz 4 1920 to 1980MHz 2110 to 2170MHz 2 1 Isolation ISO. 4 3 VSWR Switching speed 1dB compression input power VSWR TSW P1dB ACPR1 ACPR ACPR2 ACPR1 ACPR2 Harmonics Bias current Control current *1 Min. Typ. Max. 0.60 0.80 0.85 0.60 0.80 0.85 0.60 0.80 0.85 0.60 0.80 0.85 Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB RF4 - RF3, 843 to 925MHz 1920 to 2170MHz RF4 - RF2, 843 to 925MHz 1920 to 2170MHz RF1 - RF3, 843 to 925MHz 1920 to 2170MHz RF1 - RF2, 843 to 925MHz 1920 to 2170MHz 50 18 13 23 18 23 16 18 13 1.2 15 -- s dBm -45 -50 -45 -50 -75 -70 180 40 dBc dBc dBc dBc dBc dBc A A VDD = 2.85V 900KHz, 30KHz BW*1 1.98MHz, 30KHz BW*1 1.25MHz, 30KHz BW*2 1.98MHz, 30KHz BW*2 *3 *3 32 2fo 3fo IDD Ictl VDD = 2.85V Vctl (H) = 1.85V *2 *3 Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 898 to 925MHz, ROHDE & SCHWARZ SMIQ06B is used as a signal source, and the modulation and filter settings conform to IS-95. Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 1920 to 1980MHz, ROHDE & SCHWARZ SMIQ06B is used as a signal source, and the modulation and filter settings conform to IS-95. Pin = 25dBm, 0/1.85V control, VDD = 2.85V, 830 to 840MHz, 1920 to 1980MHz -7- CXG1213XR (Ta = 25C, The IMD characteristics are design guaranteed.(with recommended circuit) ) Item Symbol IMD2 IMD3 1 2 IMD2 IMD3 IMD IMD2 IMD3 3 4 IMD2 IMD3 *1 *2 State *1, *1, *1, *1, *2, *2, *2, *2, *1, *1, *1, *1, *2, *2, *2, *2, Condition Blocking f= 45MHz Blocking f= 1715MHz Blocking f= 790MHz Blocking f= 2550MHz Blocking f= 190MHz Blocking f= 4050MHz Blocking f= 1740MHz Blocking f= 5980MHz Blocking f= 45MHz Blocking f= 1715MHz Blocking f= 790MHz Blocking f= 2550MHz Blocking f= 190MHz Blocking f= 4050MHz Blocking f= 1740MHz Blocking f= 5980MHz Min. Typ. -103 -106 -106 -105 -105 -115 -104 -104 -103 -108 -105 -113 -105 -108 -104 -105 Max. -93 -96 -96 -95 -95 -105 -94 -94 -93 -98 -95 -103 -95 -98 -94 -95 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Rxf = 880MHz, Txf= 835MHz(Pin1= 23dBm), Pin2= -15dBm, 0/1.85V control, VDD = 2.85V Rxf = 2.12GHz, Txf= 1.93GHz(Pin1= 23dBm), Pin2= -15dBm, 0/1.85V control, VDD = 2.85V DC Bias Conditions (Ta = -35 to +85C) Item Vctl (H) Vctl (L) VDD Min. 1.6 0 2.6 Typ. 1.85 -- 2.85 Max. 3.2 0.4 3.2 Unit V V V -8- CXG1213XR Package Outline (Unit: mm) LEAD PLATING SPECIFICATIONS ITEM LEAD MATERIAL SOLDER COMPOSITION PLATING THICKNESS SPEC. COPPER ALLOY Sn-Bi Bi:1-4wt% 5-18m -9- Sony Corporation |
Price & Availability of CXG1213XR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |